GYPSUM BOARD FIT OUT
OMAN, Oman
LIGHT AND HOPE OVERSEAS PLACEMENT AGENCY
DMW License No: POEA-009-LB-011516-R105 Ground Floor, Pearl Of The Orient Tower, 1240 Roxas Boulevard, Manila, Metro Manila, Philippines
8-559-5904
Principal / Employer
AL BATINAH GOLDEN LANDMARKS
Qualifications
Male22 Years Old and AboveMinimum of 2 Years ExperienceAt Least Bachelor's / College DegreeAL BATINAH GOLDEN LANDMARKS
GYPSUM BOARD FIT OUT
OMAN
JOB DESCRITIONS:
Apply plasterboard or other wallboard to ceilings or interior walls of buildings. Apply or mount acoustical tiles or blocks, strips, or sheets of shock-absorbing materials to ceilings and walls of buildings to reduce or reflect sound. Materials may be of decorative quality. Includes lathers who fasten wooden, metal, or rockboard lath to walls, ceilings or partitions of buildings to provide support base for plaster, fire-proofing, or acoustical material.
Job Tasks
- Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
- Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.
- Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
- Hang dry lines to wall moldings to guide positioning of main runners.
- Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
- Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights when necessary.
- Assemble or install metal framing or decorative trim for windows, doorways, or vents. Coordinate work with drywall finishers who cover the seams between drywall panels. Trim rough edges from wallboard to maintain even joints, using knives.
- Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
- Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.
- Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
- Cut metal or wood framing and trim to size, using cutting tools.
- Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
- Scribe and cut edges of tile to fit walls where wall molding is not specified.
- Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.
- Suspend angle iron grids or channel irons from ceilings, using wire.
- Seal joints between ceiling tiles and walls.
- Install blanket insulation between studs and tack plastic moisture barriers over insulation.
- Nail channels or wood furring strips to surfaces to provide mounting for tile.
- Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.
- Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.
- Install metal lath where plaster applications will be exposed to weather or water, or for curvedor irregular surfaces.
- Remove existing plaster, drywall, or paneling, using crowbars and hammers.
- Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.
- Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.
MINIMUM REQUIREMENTS:
MALE 22 – ██████
· Vocational/College graduate w/ at least 2 years of related working experience.
· Well verse in ENGLISH language.
· Hardworking
INTERESTED APPLICANTS SHOULD SEND THEIR UPDATED RESUME AND COPY OF PASSPORT FOR EVALUATION TO [email protected]
“WE ENCOURAGE WALK-IN APPLICANTS “
LIGHT & HOPE OVE RSEAS PLACEMENT AGENCY
105 Pearl of the Orient Tower
1240 Roxas Boulevard, Ermita Manila
(Across From US Embassy)
Office Hours: 9AM-6PM
Telephone: (02) 559-5904 / (02) 353 8978
Mobile: 09179596328 / 09186863723
Ms. JOY
Email: [email protected]
Website: www.lightandhopeph.com
FACEBOOK : https://www.facebook.com/LightHopeOverseasPlacementAgencyInc
(CAGAYAN DE ORO BRANCH)
6B G/F Capistrano Cruz Taal St., Cagayan De Oro City, 9000
Tel. NO. (088) 880 - 5079 / (088) 880 - 5203
09054039175 / 09198379181
09054039174 / 09198379185
E-MAIL: [email protected]
EMAIL : [email protected]
For Manpower Pooling / No Fees Collected
Beware of Illegal Recruiters