ENGINEER III
Dammam, Saudi Arabia
This job has already expired. These job details are for viewing purposes only.
Vacancies 10
Apply Until: Aug 17, 2015
INFOTECH PROFESSIONAL SERVICES INCORPORATED
DMW License No: POEA-040-LB-022719-R
Address
MRE Commercial Complex, 1157-E Quezon Avenue, Brgy. Sta. Cruz, 1111 Quezon City, Metro Manila, Philippines
Contact Number(s)
3-414-4884/7-950-6018
Company Profile
https://infotech.workabroad.ph/profile/agency/796/infotech
Principal / Employer
AL JEHAT COMPANY (JATCO of SAUDI ARAMCO)
Qualifications
Male27 Years Old and AboveMinimum of 5 Years ExperienceAt Least Bachelor's / College Degree
For manpower pooling only. No fees in any form and/or purpose will be collected from the applicants. Beware of illegal recruiters and human traffickers.
Qualifications:
- Candidates must have at least Bachelor's / College Degree.
- The job requires Male applicants only
- Minimum of 5 years working experience is required for this position.
- Applicants must be ████████████ and above
MINIMUM REQUIREMENTS
EDUCATION: B.S. in Engineering.
EXPERIENCE: Five years of professional experience, preferably in the oil or similar process industry.
LANGUAGE REQUIREMENTS: A thorough knowledge of English is required to perform work as described and make clear and concise verbal and written reports and keep up with technical advancements. Arabic not required, but desirable for American incumbents in this position.
OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Aramco Codes, Standards and Specifications.
Department Brief Description & Requirements
Successful candidate will be expected to work on Fire Detection & Alarm Systems as part of the project (Replacement of Fire Alarm System in CS Facilities in Saudi Aramco). Assigned tasks include review different fire detection system designs, inspect fire systems, work as project engineer for both NDE and BI project, and participate in all project stages from design to commissioning according to Saudi Aramco and international standards.
Develop continuous improvements solutions and formulates the design basis by collecting, analyzing information and data relative to operating requirements, process, economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction, modifications or maintenance to equipment
Develop Cost estimates for the cost of engineering, labor, equipment and materials based on analysis of preliminary design data; draws up the expenditure request and justification; and assembles the supporting detail; Reviews the work of others so engaged and recommends such changes as may be required.
Lead the development of engineering specification Rev 0 and develops material and equipment specifications and resolves related engineering problems in rendering the design by applying accepted engineering principles, codes and standards; making the necessary diagrams and calculations; and considering the economic factors involved.
Assists other engineers in the solution of problems outside their specialty (application).
Outlines the supporting service requirements such as drafting, surveying, materials take-off, requisitioning and clerical services; checks and coordinates the progress of such work; and reviews it for accuracy upon completion.
EXPERIENCE: Five years of professional experience, preferably in the oil or similar process industry.
LANGUAGE REQUIREMENTS: A thorough knowledge of English is required to perform work as described and make clear and concise verbal and written reports and keep up with technical advancements. Arabic not required, but desirable for American incumbents in this position.
OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Aramco Codes, Standards and Specifications.
Department Brief Description & Requirements
Successful candidate will be expected to work on Fire Detection & Alarm Systems as part of the project (Replacement of Fire Alarm System in CS Facilities in Saudi Aramco). Assigned tasks include review different fire detection system designs, inspect fire systems, work as project engineer for both NDE and BI project, and participate in all project stages from design to commissioning according to Saudi Aramco and international standards.
Develop continuous improvements solutions and formulates the design basis by collecting, analyzing information and data relative to operating requirements, process, economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction, modifications or maintenance to equipment
Develop Cost estimates for the cost of engineering, labor, equipment and materials based on analysis of preliminary design data; draws up the expenditure request and justification; and assembles the supporting detail; Reviews the work of others so engaged and recommends such changes as may be required.
Lead the development of engineering specification Rev 0 and develops material and equipment specifications and resolves related engineering problems in rendering the design by applying accepted engineering principles, codes and standards; making the necessary diagrams and calculations; and considering the economic factors involved.
Assists other engineers in the solution of problems outside their specialty (application).
Outlines the supporting service requirements such as drafting, surveying, materials take-off, requisitioning and clerical services; checks and coordinates the progress of such work; and reviews it for accuracy upon completion.
Reviews the work performed elsewhere than in SAO for conformance with SAO conditions and to assure its appropriate relationship to existing installations; and if required, redesigns and recommends necessary modifications.
Studies and recommends appropriate sites and locations for proposed installations and facilities.
Acts as the project design engineer on assigned projects. Follows and inspects the construction progress of assigned projects assuring conformance with design specifications, codes and standards; Recommends or confirms design changes, material and equipment substitutes; and assures that costs do not exceed appropriated funds by anticipating overruns and justifying supplementary appropriation requests.
Performs a variety of related work such as initiating reports, correspondence and cables relative to assigned projects, assembling performance data and conducting studies relative to the development, procurement or adaptation of equipment; interpreting the meaning and application of codes and standards, reviewing operating procedures and safety instructions; acting as technical consultant on operating problems.
Following are specific applications of this job:
Civil Engineer - Normally designs or studies structural modifications to facilities such as industrial shop buildings, warehouses, residences, marine piers, oil handling, processing, storage and pipeline facilities, facilities, sewer systems, roads and streets. Occasionally called upon to design new facilities of the types mentioned.
Chemical Engineer - Normally handles process studies or design modifications in utilities, oil manufacturing or oil handling facilities, Occasionally called upon to design or evaluate new process installations.
Electrical Engineer - Formally designs or studies electrical modifications to oil processing and oil handling facilities, residences and utilities. Occasionally called upon to design electrical aspects of new facilities of the type mentioned.
Mechanical Engineer - Normally designs or studies mechanical modifications to oil processing, oil handling and utilities facilities. Occasionally called upon to design mechanical aspects of new facilities of the type mentioned.
Survey Engineering - Includes engineering analysis and the development of recommendations and alternatives in the solution of complex problems related to the surveys of company and government properties and facilities. This includes the recognition of problems, through analysis of present situation and objectives, development of comprehensive program and implementation to produce the desired end product. Typical projects would involve the establishment of high precision horizontal control in remote desert regions for future oil and gas development, evaluation and recommendation of state of the art photogrammetric equipment for digital mapping systems.
Studies and recommends appropriate sites and locations for proposed installations and facilities.
Acts as the project design engineer on assigned projects. Follows and inspects the construction progress of assigned projects assuring conformance with design specifications, codes and standards; Recommends or confirms design changes, material and equipment substitutes; and assures that costs do not exceed appropriated funds by anticipating overruns and justifying supplementary appropriation requests.
Performs a variety of related work such as initiating reports, correspondence and cables relative to assigned projects, assembling performance data and conducting studies relative to the development, procurement or adaptation of equipment; interpreting the meaning and application of codes and standards, reviewing operating procedures and safety instructions; acting as technical consultant on operating problems.
Following are specific applications of this job:
Civil Engineer - Normally designs or studies structural modifications to facilities such as industrial shop buildings, warehouses, residences, marine piers, oil handling, processing, storage and pipeline facilities, facilities, sewer systems, roads and streets. Occasionally called upon to design new facilities of the types mentioned.
Chemical Engineer - Normally handles process studies or design modifications in utilities, oil manufacturing or oil handling facilities, Occasionally called upon to design or evaluate new process installations.
Electrical Engineer - Formally designs or studies electrical modifications to oil processing and oil handling facilities, residences and utilities. Occasionally called upon to design electrical aspects of new facilities of the type mentioned.
Mechanical Engineer - Normally designs or studies mechanical modifications to oil processing, oil handling and utilities facilities. Occasionally called upon to design mechanical aspects of new facilities of the type mentioned.
Survey Engineering - Includes engineering analysis and the development of recommendations and alternatives in the solution of complex problems related to the surveys of company and government properties and facilities. This includes the recognition of problems, through analysis of present situation and objectives, development of comprehensive program and implementation to produce the desired end product. Typical projects would involve the establishment of high precision horizontal control in remote desert regions for future oil and gas development, evaluation and recommendation of state of the art photogrammetric equipment for digital mapping systems.